Phone: +86 13592730872 E-mail: bf17@baifeitest.com
Safety Shoes Compression and Puncture Testing Machine
Safety Shoes Compression and Puncture Testing Machine
Standards
Safety Shoes Compression and Puncture Testing Machine：
GB 21148-2020, GB/T 20991-2007, EN ISO 20344, EN ISO 22568, EN ISO 12568
Product Description
Place the steel toe cap of the safety shoe between the upper and lower pressure plates of the machine, then apply the specified pressure, and measure the deformation extent of the steel toe cap. This is to verify whether the toe can be sufficiently protected during wear.
For EN standards, a gauge is used to measure the internal clearance of the steel toe cap; for ANSI standards, a probe is inserted into the steel toe cap for inspection.
For EN standards, a gauge is used to measure the internal clearance of the steel toe cap; for ANSI standards, a probe is inserted into the steel toe cap for inspection.
Technical Parameters
Test Speed: 0–40 mm/min
Maximum Load: 20000 N (optional)
Unit Switching: kgf, N, lbf
Displacement Resolution: 0.0025 mm
Test Fixtures: 1 set of compression fixture & 1 set of puncture fixture
Motor: AC variable frequency motor, controlled by frequency converter
Speed Indication Error: ±0.5%
Dimensions: 71 × 33 × 74 cm
Power Supply: AC 220 V, 400 W
Weight: 100 kg
Maximum Load: 20000 N (optional)
Unit Switching: kgf, N, lbf
Displacement Resolution: 0.0025 mm
Test Fixtures: 1 set of compression fixture & 1 set of puncture fixture
Motor: AC variable frequency motor, controlled by frequency converter
Speed Indication Error: ±0.5%
Dimensions: 71 × 33 × 74 cm
Power Supply: AC 220 V, 400 W
Weight: 100 kg
Safety Shoes Compression and Puncture Testing Machine
Standards
Safety Shoes Compression and Puncture Testing Machine：
GB 21148-2020, GB/T 20991-2007, EN ISO 20344, EN ISO 22568, EN ISO 12568
Product Description
Place the steel toe cap of the safety shoe between the upper and lower pressure plates of the machine, then apply the specified pressure, and measure the deformation extent of the steel toe cap. This is to verify whether the toe can be sufficiently protected during wear.
For EN standards, a gauge is used to measure the internal clearance of the steel toe cap; for ANSI standards, a probe is inserted into the steel toe cap for inspection.
For EN standards, a gauge is used to measure the internal clearance of the steel toe cap; for ANSI standards, a probe is inserted into the steel toe cap for inspection.
Technical Parameters
Test Speed: 0–40 mm/min
Maximum Load: 20000 N (optional)
Unit Switching: kgf, N, lbf
Displacement Resolution: 0.0025 mm
Test Fixtures: 1 set of compression fixture & 1 set of puncture fixture
Motor: AC variable frequency motor, controlled by frequency converter
Speed Indication Error: ±0.5%
Dimensions: 71 × 33 × 74 cm
Power Supply: AC 220 V, 400 W
Weight: 100 kg
Maximum Load: 20000 N (optional)
Unit Switching: kgf, N, lbf
Displacement Resolution: 0.0025 mm
Test Fixtures: 1 set of compression fixture & 1 set of puncture fixture
Motor: AC variable frequency motor, controlled by frequency converter
Speed Indication Error: ±0.5%
Dimensions: 71 × 33 × 74 cm
Power Supply: AC 220 V, 400 W
Weight: 100 kg
